home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Arsenal Files 3
/
The Arsenal Files 3.iso
/
lan
/
os2utp.exe
/
4X
/
CAPTURE.MSG
(
.txt
)
< prev
next >
Wrap
Novell/C-Worthy Message Librarian
|
1994-05-05
|
31KB
|
656 lines
Novell Message Librarian Data File Version 1.00
COPYRIGHT (c) 1985 by Novell, Inc. All Rights Reserved.
201: A number from 1 through 18 is required with
the tabs option.
227: The local printer number must be a number from 1 through %d.
221: The form number specified must be a number from
0 through 255.
Notify Help Screen\hPurpose: Receive messages from the print server to
appear at your workstation.\hOptions:
NOTIfy (abbreviated NOTI)
Include if you want to be notified that your
data has printed. A message will appear across
the bottom of your screen:
>> bannername PRINTED ON printername.
Bannername is either LPT or the text you
specified with the Banner option.
No NOTIfy (abbreviated NNOTI)
Include if you do not want to be notified. You
need this only if NOTIfy is enabled in your
print job configuration and you want to
disable it.
Default is No NOTIfy.
242: The NetWare server name must have from 2 to 47 characters.
298: An unknown option %s is specified on the command
line. Consult your documentation for correct command syntax.
General Help\hPurpose: CAPTURE allows applications not
network compatible to print.\hSyntax: CAPTURE [options]
Options:
/SHow - Display status of LPT ports
/Detail - Detail capture
/CReate=<network file> - Capture to file
/Server=<NetWare server> - Override default server
/Jobname=<configuration> - Specify print job
configuration name
/Ver - Display program version information
/HOLD - Submit a print job with user hold\hTo end a capture:
/End Capture (required)
/CAncel /Local=n (1-9) /ALL\hOther help: /? option or /? ALL
Capturing data to server %s print queue %s
224: The form number supplied was not in the forms
database. Default values were used.
Automatic end: Disabled
505: There is not a default queue assigned to printer %s. Use NWADMIN or PCONSOLE to assign a default queue to this printer.
Tabs: %d
Tabs: No conversion
Copies: %-21u
Form: %-21s
Banner: %-21s
Timeout count: %d seconds
103: Network error %#4X occurred during an attempt to get
information about server %s. Make sure the server is up
and running. If the error persists, look up the error code in
your System Messages documentation for more information.
Copies Help Screen\hPurpose: Specify the number of copies to print.\hOptions:
Copies=<number> (abbreviated C=)
Use to indicate how many copies you want to
print. Replace <number> with the number of
copies (1 - 65000). Default number of
copies is 1. This will be the number of
copies printed for each capture.
921: Either the supervisor has locked the bindery or
volume SYS: is not mounted on server %s.
450: The specified directory %s does not exist.
Make sure you have specified a valid network directory.
613: You must be a Directory Services user to run CAPTURE with a Job option containing [:job container].
Capturing data to server %s print queue unknown
Capturing data to server %s in a file
233: You cannot specify both a printer and a server
on the command line. Use a queue instead of the printer.
Timeout count: Disabled
453: This utility is unable to create the capture file in
the specified directory. Try again. If the problem persists, notify
your network supervisor.
614: CAPTURE cannot locate the job configuration owner specified
in the "Job=jobname:job configuration owner" option. Make sure that the owner
exists and that the context is correct.
Examples: CAPTURE Job=myprinter:.Printing.Sales.Novell
CAPTURE Job=myprinter:Printing..
VERSION=4.03.3
Enter user name for server %s:
922: Intruder detection lockout has disabled this account.
Capturing is not currently active.
234: You cannot specify both the Create and the Server
options on the command line. Try CAPTURE CR=server\vol:filename.
Copies: 1
256: CAPTURE is unable to map a connection to the specified
server. Map a drive to this server, then try CAPTURE again using the
mapped drive letter.
<<< BAD MESSAGE >>>
Form feed: Disabled
Form feed: Enabled
Device LPT%d re-routed to file %s on server %s.
Enter your password:
451: The NetWare server in the "CAPTURE CR" (CReate) option does
not match that specified with the "Server" option (%s).
Make sure the drive you specified is mapped to a directory on
your default server.
452: You do not have sufficient rights to create the file %s.
VeRsIoN=4.03
139: The account balance for this user on server
%s has expired or dropped below the minimum. The network
supervisor will need to reconcile the account before the user
can login.
Would you like to change your password on NetWare server %s? (Y/N)
Retype your new password:
140: This user account on server %s
has no accounting balance. Contact the network supervisor
to increase the balance.
141: An invalid username or password was typed in.
Access to NetWare server %s has been denied.
162: You are not authorized as a print queue user for
print queue %s. Use PCONSOLE to determine what users
are authorized to use this queue. If you are an authorized user
and the problem persists, check with your network supervisor.
Enter your new password:
400: Your password on NetWare server %s
has been changed.
401: The new password is too short. Specify a longer password.
402: The new password has been used previously. Specify a unique
password not previously used.
403: Your password on NetWare server %s
has not been changed. Try changing it with NETADMIN, NETUSER, or
SYSCON (NetWare 3 servers).
404: An invalid character was found in the specified password.
Do not use the <Ctrl> key when typing passwords.
405: The new password was not retyped correctly.
Try again.
GUEST
(PUBLIC)
Automatic end: Enabled
157: A default print queue cannot be found.
Do one of the following:
Specify a printer or print queue with this utility.
Specify a default printer or print queue in a default print job configuration.
Have the network supervisor specify a default print queue with SPOOL.
211: A number from 1 through %u is required with
the copies option.
Device LPT%d: re-routed to print queue %s on server %s.
LPT%d:
504: This utility is unable to find print queue %s
on server %s. Use PCONSOLE or NWAdmin to make sure the
print queue exists and is located on the specified server.
Job configuration: %s
101: The queue you tried to capture to is on a server using a
NetWare version not supported by this utility. Upgrade the server to a
current version or capture to a queue on a different server.
130: The supervisor has disabled your user account on NetWare
server %s. This is probably only a temporary condition.
Try logging in later.
133: Your password has expired and there are no grace
logins available. Ask the supervisor to unlock your account.
251: An LPT port number between 1 and %d must be used with this
workstation. The number %d was specified in the print job configuration
(%s). To capture, specify a valid LPT port number
using the l= option.
222: The form name, %s, could not be found.
Default values were used.
200: The tab size specified must be a number from
1 through 18.
611: The print job configuration %s
could not be found in the directory. PRINTCON databases in
Directory Services are attached to users or to containers.
Either create a valid configuration in your user database
or in the container's database.
Unknown
Notify: Disabled
Notify: Enabled
For help, type CAPTURE /?.
228: A number from 1 through %d is required with the
Local or LPT options on this workstation.
End Capture Help Screen\hPurpose: End capturing of any or all printer ports.\hOptions:
End Capture (abbreviated EC)
Include if you wish to end the capture of data
sent to specified LPT ports. Default is LPT1.
CAncel (abbreviated CA)
Include with End Capture to discard the data that
was being sent to a print queue.
Either of the following may be used with End Capture:
ALL (no abbreviation)
Include to end capture of all LPT ports.
Local=<port number> (abbreviated L=)
Include to specify which capture will be ended,
giving the LPT port number.
612: The print job configuration %s
could not be found on your default server %s.
Use PRINTCON to view valid configurations on this server.
Then either create a configuration with the name
specified or specify a valid configuration.
Banner: (None)
225: The timeout value specified must be a number of seconds from
0 through 1000.
226: A number from 0 through 1000 is required with
the TI (Timeout) option.
Print Job Help Screen\hPurpose: Specify the print job configuration to
use to print this print job.\hOptions:
Job=<job configuration> (abbreviated J=)
Specify which job configuration to use.\hCAPTURE options can be configured by using PRINTCON.
The order of precedence is
1. Specific use of the command line option
2. Specific use of the Job option
3. Default job
4. Internal defaults indicated below:
Server=your default server
Local=1 -- Banner=LPT -- NAMe=your username
Form=0 -- Copies=1 -- No Tabs -- TImeout=0
Form Feed -- AUtoendcap -- No NOTIfy
CoPyRiGhT=(c) Copyright 1983 - 1994 Novell, Inc. All Rights Reserved.
Print Job Help Screen\hPurpose: Specify the print job configuration to
use to print this print job.\hOptions:
Job=<job configuration>[:<job configuration owner>] (abbreviated J=)
Specify which job configuration to use.\hCapture options can be configured in a print job configuration.
The order of precedence is
1. Specific use of the command line option
2. Specific use of the Job option
3. Default job
4. Internal defaults
indicated below:
Local=1 -- Banner=LPT -- NAMe=your username
Form=0 -- Copies=1 -- No Tabs -- TImeout=0
Form Feed -- AUtoendcap -- No NOTIfy
The optional [:<job configuration owner>] can be used to access job
configurations outside the current search path.
252: The setup (%d) and/or reset (%d) strings found in your
PRINTDEF mode are too long for this workstation. Use shorter strings or
increase the capacity of this workstation by adding:
PRINT HEADER = <number>
PRINT TAIL = <number>
to your NET.CFG file (under the NETWORK DOS REQUESTER).
220: A form ID number (0-255) or form name is required with
the "Form" option.
LPT1 through LPT%u are set to local mode.
General Help\hPurpose: CAPTURE allows applications not network
compatible to print.\hSyntax: CAPTURE [options]
Options:
/SHow - Display status of LPT ports
/Detail - Detail capture
/Server=<NetWare server> - Override default server
/Job=<jobname> - Specify print job
configuratin name
/Ver - Display program version information
/HOLD - Submit a print job with user hold\hTo end a capture:
/EC (required)
/CAncel /Local=n <1-9> /ALL\hOther help: /? option or /? ALL
Device %s is set to local mode.
230: You attempted to capture to a printer in bindery mode.
In bindery mode, you can print only to a print queue. Specify a print queue.
For example, q=LEGAL_Q.
General Help\hPurpose: CAPTURE allows applications not network
compatible to print.\hSyntax: CAPTURE [options]
Options:
/SHow - Display status of LPT ports
/Detail - Detail capture
/CReate=<net path> - Capture to file
/Server=<NetWare server> - Specify Bindery server
/Job=<jobname>[:<job configuration owner>] - Specify print job
configuration name.
/Ver - Display program version information
/HOLD - Submit a print job with user hold\hTo end a capture:
/End Capture (required)
/CAncel /Local=n <1-9> /ALL\hOther help: /? option or /? ALL
232: A printer name is required with the "Printer" option.
163: This workstation does not have enough memory to run CAPTURE.
Check the Troubleshooting information in the System Messages documentation
for more information.
600: This utility is accessing an incorrect version of the
print job configuration database. Make sure you are using the most
current version of PRINTCON.
Capturing data to print queue %s
Capturing data to unknown print queue
General Help\hPurpose: CAPTURE allows applications not network
compatible to print.\hSyntax: CAPTURE [options]
Options are any of:
/SHow - Display status of LPT ports
/Detail - Detail capture
/Server=<NetWare server> - Specify Bindery server
/Job=<jobname>[:<job configuration owner>] - Specify print job
configuration name.
/Ver - Display program version information
/HOLD - Submit a print job with user hold\hTo end a capture:
/End Capture (required)
/CAncel /Local=n <1-9> /ALL\hOther help: /? option or /? ALL
Device LPT%d: re-routed to print queue %s.
503: This utility is unable to find print queue %s
in the directory. Use PCONSOLE or NWAdmin to make sure the print queue
exists in the specified location.
601: This utility was unable to get the default print job
configuration. Either specify a print job configuration using the "Job"
option or specify a print queue on the command line.
608: Printer %s was specified in a print
job configuration, but the printer cannot be found in the directory.
Do one of the following:
Specify a printer with the "Printer" option.
Use PRINTCON to change the specified printer.
Create a printer with the specified name in the directory.
917: This utility was unable to set the context.
609: Printer %s was specified in a print job
configuration, but no print queues are serviced by this printer.
Use PCONSOLE or NWAdmin to assign the printer to a queue,
or specify a different printer.
Printer %s does not have a default print queue.
A substitute print queue serviced by the same printer will be selected.
Device LPT%d: re-routed to printer %s.
Keep: Enabled
Keep: Disabled
Name: %-21s
Name: (None)
Printer data sent to print queues has been discarded.
End Capture Help Screen\hPurpose: End capturing of any or all printer ports.\hOptions:
End Capture (abbreviated EC)
Include if you wish to end the capture of data
sent to specified LPT ports. (Default is LPT1.)
CAncel (abbreviated CA)
Include with End Capture to discard the data that
was being sent to a print queue.
Either of the following may be used with End Capture:
ALL (no abbreviation)
Include to end capture of all LPT ports.
Local=<port number> (abbreviated L=)
Include to specify which capture will be ended,
giving the LPT port number.
Printer data was sent to a file. The file has been closed.
All printer data was sent to files. The files have been closed.
All printer data sent to files has been preserved in the closed files.
Printer data sent to print queues has been discarded.
250: The "CAPTURE CR" (CReate) option requires that a
network path be specified. You tried to capture to a local drive.
The path specifying local drive %s: is not valid.
210: The number of copies specified must be a number from
1 through %u.
>>>Enter = More C = Continuous Esc = Cancel
923: An unexpected error has occurred: %d (%04.4X).
906: The Unicode files cannot be found.
121: The destination NetWare server %s
is unknown at this time. Make sure that you typed the server
name correctly and that it is up and running. You can use NLIST
or NETADMIN to get a list of the servers on the network.
Print Queue Help Screen\hPurpose: Direct a print job to a specific print queue.\hOptions:
Queue=<print queue name> (abbreviated Q=)
Indicate to which print queue the print job
should be sent. There is no default print queue
set up unless you
specified a print queue in a print job
configuration. The <print queue name> should be
replaced with the name of the print queue, any
number of characters between 2 and 47.
Create Help Screen\hPurpose: To capture printer data to a network file
instead of a print queue.\hOptions:
Local=n (abbreviated L=)
Can be used in conjunction with the CReate option
to specify which port will be captured. Default is LPT1.
CReate=<network path/filename> (abbreviated CR=)
Use to send all captured data to a network
file.
Printer/Queue Help Screen\hPurpose: Direct a print job to a specific printer
or print queue.\hOptions:
Printer=<printer name> (abbreviated P=)
Indicate to which printer the print job should
be sent. Replace <printer name> with the name
of the printer. The print queue associated with
the printer will be used. If you want to know which
print queue will be used, include the Detail
option.
Queue=<print queue name> (abbreviated Q=)
Indicate to which print queue the print job
should be sent.
There is no default set up unless you have created
a print job configuration.
The Printer and Queue options are mutually exclusive.
Server Help Screen\hPurpose: Direct a print job to a queue on a NetWare Bindery
server.\hOptions:
Server=<NetWare server name> (abbreviated S=)
Indicate the NetWare server to which data
should be sent for printing.
Banner Help Screen\hPurpose: Determine if a banner page will print at
the beginning of your print job. You can replace
the user name and LPT.\hOptions:
No Banner (abbreviated NB)
Specifies that no banner page be printed.
NAMe=<name> (abbreviated NAM=) Default is your user name.
Specify text that will appear on the upper
part of the banner page.
Banner=<banner name> (abbreviated B=) Default is LPT.
Specify text that will appear on the lower
part of the banner page.
Replace <banner name> or <name> with up to 12
characters of text. Place quotes ("") around the
text if it contains spaces.
Copies Help Screen\hPurpose: Specify the number of copies to print.\hOptions:
Copies=<number> (abbreviated C=)
Use to indicate how many copies you want to
print. Replace <number> with the number of
copies (1 - 255). Default number of copies
is 1. This will be the number of copies
printed for each capture.
Form Help Screen\hPurpose: Specify a form to print on.\hOptions:
Form=<form> (abbreviated F=)
Specify the name or number of the form to
print your job on. Default is Form=0.
Form Feed Help Screen\hPurpose: Leave the printer ready to start the next
print job at the top of the next sheet of paper
after this print job is printed.\hOptions:
Form Feed (abbreviated FF)
If Form Feed is enabled, the printer starts
printing the next job at the top of the next
sheet of paper. However, if an application
places a form feed at the end of its output,
using this option causes an extra blank page to
be fed through. Default is Form Feed enabled.
No Form Feed (abbreviated NFF)
Include to disable form feed at the printer.
Print Job Help Screen\hPurpose: Specify the print job configuration to
use to print this print job.\hOptions:
Job=<job configuration> (abbreviated J=)
Specify which job configuration to use.\hCapture options can be configured in a print job configuration.
The order of precedence is
1. Specific use of the command line option
2. Specific use of the Job option
3. Default job
4. Internal defaults indicated below:
Server=your default server
Local=1 -- Banner=LPT -- NAMe=your username
Form=0 -- Copies=1 -- No Tabs
Form Feed -- No NOTIfy
Print Job Help Screen\hPurpose: Specify the print job configuration to
use to print this print job.\hOptions:
Job=<job configuration>[:<job configuration owner>] (abbreviated J=)
Specify which job configuration to use.\hCapture options can be configured in a print job configuration.
The order of precedence is
1. Specific use of the command line option
2. Specific use of the Job option
3. Default job
4. Internal defaults indicated below:
Local=1 -- Banner=LPT -- NAMe=your username
Form=0 -- Copies=1 -- No Tabs
Form Feed -- No NOTIfy
The optional[:<job configuration owner>] can be used to access
job configurations outside the current search path.
Tabs Help Screen\hPurpose: Control tab size in print jobs.\hOptions:
Tabs=<number> (abbreviated T=)
If your printer does not interpret tabs,
specify the number of spaces between 1 and 18
to replace each tab in your print job.
No Tabs (abbreviated NT)
Include if your printer accepts tab characters
as part of a byte stream. This insures that
all tabs in your print job arrive at the
printer unchanged. Default is No Tabs.
Detail Help Screen\hPurpose: Request additional information about
printing parameters.\hOptions:
Detail (abbreviated D)
Include if you wish to verify that the
combination of command line options and print
job configuration options are producing the
desired effect. The Detail option also
clarifies which print queue is being used when
this might not otherwise be displayed.
Timeout Help Screen\hPurpose: Print from an application without exiting
to DOS.\hOptions:
TImeout=<seconds> (abbreviated TI=)
Include if you want to print from an
application without exiting the application.
Replace <seconds> with the number from 0 to
1000 inclusive. The TImeout option sends data
to the print queue a specified number of
seconds after the application last writes to
the port.
The default is 0 meaning that no timeout
occurs.
Show Help Screen\hPurpose: Display the current capture status of all
LPT ports.\hOptions:
SHow (abbreviated SH)
Use to view the current status of LPT ports.
SHow will indicate:
Whether they are captured.
Whether they are set to send data to a
network print queue or to a network file.
How the CAPTURE options are set.
Using the SHow option does not affect the
capture of an LPT port. You cannot use SHow
with other options.
Local Help Screen\hPurpose: Specify the LPT port to capture or end
capture.\hOptions:
Local=<port number> (abbreviated L=)
Can be included in order to specify the port
to be affected. Default is LPT1. The value of <port number> can
be a number between 1 and 9 inclusive. The
exception is in the End Capture (EC) option which allows
the ALL option to be used instead to indicate
that all LPT ports will have their captures
ended. The number of ports available to capture can be
specified by including the line
"NETWORK PRINTERS = <0-9>" in your NET.CFG file.
LPT1 - LPT9
These are alternate spellings of the Local
option which allow you to specify the port
number in a more meaningful way.
Keep Help Screen\hPurpose: Preserve data captured even though the
workstation hangs.\hOptions:
Keep (abbreviated K)
Include to insure that the NetWare server will
keep all data it receives from your
workstation if your workstation hangs or loses
power while you are capturing data to the
NetWare server. Use this option if you plan
to capture data over several hours.
Automatically End Capture Help Screen\hPurpose: Determine if separate print jobs will be
created each time the printer port is written to.\hOptions:
AUtoendcap (abbreviated AU)
Include if you want previously captured data
to begin printing when you exit or enter an
application. The default is Autoendcap set.
No Autoendcap (abbreviated NA)
Include to allow capture to continue
regardless of when you enter or exit an
application. Capture must then be ended
explicitly with the End Capture (EC) option.
231: You cannot specify both a printer and a print queue on the
same command line. If you are in Directory Services mode, specify either a
printer or a print queue. If you are in bindery mode, specify a print queue.
602: This utility could not open the print job configuration
database, PRINTJOB.DAT owned by %s. Try specifying the CAPTURE
options on the command line instead of using the "Job" option.
603: This utility could not read the print job configuration
database, PRINTJOB.DAT owned by %s. Try specifying the CAPTURE
options on the command line instead of using the "Job" option.
604: An internal program error prevented CAPTURE from opening the
PRINTCON database. Try specifying the CAPTURE options on the command line
instead of using the "Job" option. If the problem persists, notify your
network supervisor.
605: No print job configuration default has been set.
Specify a print job configuration using the "Job" option, or
specify a queue on the command line.
606: A valid print job configuration was not specified.
Use PRINTCON to see which configurations are currently defined for your
user account. Then specify a valid job with the "Job" (j=) option.
607: The default print job configuration cannot be found.
Specify a printer or print queue (not both) on the command line, or
else create a new print job configuration.
500: This utility is unable to find printer, %s,
in the directory. Make sure the printer name was typed correctly,
or use PCONSOLE or NWAdmin to make sure that it exists.
501: No print queues are serviced by the specified printer,
%s. Either choose another printer or assign a queue
to the printer.
134: Your station is not approved to attach to NetWare server
%s using this user account. The supervisor has limited
the stations that are allowed to attach to this server.
135: NetWare server %s does not allow you to
attach during an unauthorized time period. The supervisor has
limited the times that this account can be accessed.
136: This user account on server %s has expired
or has been disabled. Ask the network supervisor to enable the account.
137: Too many stations are already attached to server
%s using this user account. The supervisor has limited
the number of active concurrent connections. Another station
must logout before you can login to this server.
132: Your password has expired. Your network supervisor may
need to unlock your account.
122: This utility could not attach to the NetWare server
%s. Make sure that you typed the server name correctly
and that it is up and running. You can use NLIST or NETADMIN
to get a list of servers on the network.
700: The mode, %s, of device, %s,
cannot be found in the PRINTDEF database. Either specify a
valid mode or create a new mode with the specified name.
Print job owner: %s
Job configuration: (No print job configuration found. Defaults were used.)
502: This utility expects that when the "Server" (S=) option is
used on the command line, the "Queue" (Q=) option refers to a print queue
on the specified server. The print queue name you supplied is longer than the
maximum 47 characters allowed for a non-Directory Service based print queue.
454: The version of the NETX.VLM being used does not support the
"CAPTURE CR" (Create) option. Make sure you are using a current set of VLMs.
455: This utility is unable to create a capture file because
all drive letters from A: to Z: are in use. Use the MAP utility to
delete one of the network drive mappings and try again.
219: A form name can be no longer than 12 characters.
240: The banner must have from 1 to 12 characters.
241: The name must have from 1 to 12 characters.
General Help Page 2\hJob configuration overrides:
/Local=n <1-9>
/Keep
/Banner=<bannername> /NAMe=<name> /No Banner
/Form=<form> or n
/Queue=<print queue name>
/Copies=n (1-255)
/Tabs=n <1-18> /No Tabs
/TImeout=n <0-1000>
/Form Feed /No Form Feed
/AUtoendcap /No Autoendcap
/NOTIfy /No NOTIfy
General Help Page 2\hJob configuration overrides:
/Local=n <1-9>
/Keep
/Banner=<bannername> /NAMe=<name> /No Banner
/Form=<form> or n
/Queue=<print queue name> /Printer=<printer name>
/Copies=n <1-65000>
/Tabs=n <1-18> /No Tabs
/TImeout=n <0-1000>
/Form Feed /No Form Feed
/AUtoendcap /No Autoendcap
/NOTIfy /No NOTIfy
General Help Page 2\hJob configuration overrides:
/Local=n <1-9>
/Keep
/Banner=<bannername> /NAMe=<name> /No Banner
/Form=<form> or n
/Queue=<print queue name>
/Copies=n <1-65000>
/Tabs=n <1-18> /No Tabs
/Form Feed /No Form Feed
/NOTIfy /No NOTIfy
General Help Page 2\hJob configuration overrides:
/Local=n (1-9)
/Keep
/Banner=bannername /NAMe=name /No Banner
/Form=form or n
/Queue=print queue name /Printer=printer name
/Copies=n (1-65000)
/Tabs=n (1-18) /No Tabs
/Form Feed /No Form Feed
/NOTIfy /No NOTIfy
Server Help Screen\hPurpose: Direct a print job to a NetWare server
different from the default.\hOptions:
Server=<NetWare server name> (abbreviated S=)
Indicate the NetWare server to which data
should be sent for printing. The default is
your default server.
253: The volume for this print queue is on a different server.
This queue cannot be used in bindery mode.
254: CAPTURE cannot run because the PRINT.VLM file is not loaded.
Make sure you have a current set of VLMs loaded on this station.
LaNgUaGe=English (English)
Display Program Version Information\hPurpose: Display information about CAPTURE.EXE\h Options:
Ver (abbreviated V)
Use to display information about CAPTURE.EXE.
Ver will display:
The path to the CAPTURE.EXE file.
Version and copyright information
Additional files required to run CAPTURE.
Using the Ver option does not affect the
capture of an LPT port. You cannot use Ver
with other options.
918: This utility is trying to access an invalid context.
255: The "CAPTURE CA" (CAncel) option must be used with
the "CAPTURE EC" (End Capture) option.
For help, type "CAPTURE /? CA".
Hold Help Screen\hPurpose: Submit a print job with user hold\hOptions:
HOLD
Submit a print job to a queue, but do not print
it until the user or a print queue operator
removes the hold by using PCONSOLE or NWADMIN.
User hold: Enabled
User hold: Disabled